Martin Audio XD15

Martin Audio XD15 Very high-output two-way system from£POA

The Martin Audio XD15 is a very high-output, wide-bandwidth, two way system, equally suited to portable live sound applications, theatre sound and fixed installations. It features a high-specification 15” (380mm) low frequency drive unit and a 1.4” (35mm) exit compression driver mounted on a user-rotatable 80° x 50° constant directivity
horn.

The 15” (380mm) LF driver has a lightweight 4” (100mm) voice coil and flux demodulation rings to reduce distortion at high excursions. Its neodymium motor system combines high sensitivity with low weight and advanced cooling reduces power compression to negligible levels. The 1.4” (35mm) exit HF driver has a 3” (75mm) pure titanium dome and ultra-high flux neodymium motor system for
maximum efficiency. The internal LF/HF crossover is switchable between passive or bi-amp operation, depending on user requirements.

The XD15 is the perfect solution for very high-power applications where flexibility, ease of installation and speed of deployment are important factors. The versatile, multiangle enclosure and rotatable horn facilitate either horizontal or vertical orientation, and comprehensive brackets support the full variety of mounting options – including surface, ceiling and pole mount. Integral M8 inserts for simple eyebolt suspension increase the options even further. In its horizontal configuration, the XD15 is also ideal as a very high-output stage monitor.

When used in bi-amp mode, or with a subwoofer such as the Wavefront WS18X or WS218X it is recommended that the XD15 is used with the Martin Audio DX1.5 or
DX2 controller. When operated as a passive system, it may be used without a controller, but will benefit from the DX1.5 or DX2‘s EQ and limiter functions.

Please call us at Old Barn Audio on 01892 752246 if you have any questions, or would like to buy either a Martin Audio XD15 high power speaker system or any other product from the X Series.

Features of the Martin Audio XD15

  • Versatile, multi-angle plywood enclosure
  • Very high-output two-way system
  • 15″ (380mm)/4″ (100mm) coil, ultra-long excursion, low-distortion neodymium LF driver
  • 1.4″ (35mm) exit, titanium dome, neodymium HF compression driver
  • Rotatable 80° x 50° horn for portrait or landscape orientation
  • Switchable passive/bi-amp crossover
  • 8 ohm nominal impedance
  • Integral pole-mount and M8 rigging inserts
  • Comprehensive mounting options and accessories

Ideal applications for the XD15

  • Portable live sound reinforcement
  • Theatre Sound
  • Fixed Installations
  • High power stage monitor

XD15 Technical Specifications

Click on the icon to download the Martin Audio XD15 product data sheet.

Comments are closed.

Latest News

Lee Valley Athletics Centre Confirms With Old Barn Audio

Having worked with the White Water Centre as well as the Ice Centre, Old Barn Audio are pleased to now announce that Lee Valley Athletics Centre have confirmed once again with Old Barn Audio. Having viewed the venue and discussed needs, we … Read More

National League Football Club Grows Their Martin Audio Equipment

Old Barn Audio popped over to Dover the other week to meet up with the guys at a Dover Athletic Football Club. Having already been pleased with the effective sound that was installed into the Family Stand at the club, they are … Read More

New Sound for Ramsgate Church

Old Barn Audio were pleased to give new sound to the Shrine of St Augustine church in Ramsgate. Like many churches in the UK, a new system was necessary to improve sound throughout, enabling good hearing for all parishioners. The … Read More

View archived news