Ohm CT-15

Ohm CT-15 full range loudspeaker from £ POA

Ohm CT-15 Full range loudspeakerThe Ohm CT-15 full range loudspeaker has a 15″ driver and is the largest loudspeaker of the four arrayable full range cabinets in the Total Clarity series.

This passive two way loudspeaker is designed for both install and mobile use offering great flexibility to suit even the most difficult applications. To maximise the transient response and minimise the heat build up inside the cabinet the crossover has been simplified to adjust only the impedance and the crossover point. The use of external EQ makes it easy to tailor the tonal balance to each individual requirement without compromising the sound quality.

When space is an issue this cabinet achieves good bass response without the need for subwoofers. If more bass is required CT-15 is compatible with the large CS subwoofers making it easy to adjust the total system performance for all situations.

The speaker comes standard in black and is available in various colours on request.

Features of Ohm CT-15

  • True full range performance
  • Rotatable 60° x 40° horn for enhanced flexibility
  • Full range down to 35 Hz for standalone use where space is constricted

CT-15 uses a single Ohm 15″ with 4″ voice coil driver unit with 1.5″ compression driver mounted on a custom design rotable 60(h) x 40(v) degree horn. The horn is mounted in the 60(h) x 40(v) degree position as standard. When rotated into 40(h) x 60(v) degree together with 20 degree side wall angle true seamless point source arrays can be created.

Phase and impedance corrected crossover networks are designed for high power applications and the use of external EQ provides unrivalled tonal balance and transient response. Used with the CS subwoofers these systems will provide a very high SPL with total clarity.

There are 12 off mounting points for flexible array and flying options 6 for Brownline compatible flying points 2 x top, 2 x bottom and 2 x on the bottom pf the rear of the cabinet. The other 6 take M10 flying eyelets 2 x on each side 1 x on the top and 1 x on the bottom. The bottom of the cabinet has the omni point where the top hat is fitted as standard to allow stand mounting. The top hat can be replaced with the the tilt and turn adaptor for wall, stand and truss mounting.

Ohm CT-15 Technical Specifications

Click on the icon to download the Ohm CT-15 full range loudspeaker product data sheet.

Latest News

Martin Audio O-Line Further Enhanced

Martin Audio’s O-Line micro line array has been further enhanced with additional levels of coverage, consistency and control. This is due to the incorporation of scalable resolution, driven by the new iKON amplifiers and updated display array optimisation software. While … Read More

St John’s Church, Dormansland

We are pleased to be starting this new and large project at St John’s The Evangelist Church in Dormansland. A full audio system and video system, in the Centenary room as well as the church. In total, we will be … Read More

Restaurant Sound Installation in Malta

Most of our work is in the UK. But quite often, we get a great project to work on abroad. We have worked on European installs as well as further afield in Africa, China and other worldwide venues. So when … Read More

View archived news