Martin Audio SXHF218

The Martin Audio SXHF218 is an extremely powerful subwoofer capable of producing 148dB peak output at 1m. It is essentially the flown version of SXH218 and is the ideal partner for Wavefront Precision WPL arrays where maximum low frequency output is required.

Its Hybrid® horn/reflex loading combines the acoustic efficiency and impact of bass horn technology with the low frequency extension of a reflex design, enabling it to produce significantly higher output levels than a traditional reflex-loaded subwoofer. With an operating range of 32-150Hz + 3dB, it features dual long-excursion 18” (460mm)/4.5” (115mm) voice coil neodymium drivers, with water resistant cones and triple roll surrounds.

The enclosure is constructed from multi-laminate plywood and coated with hard-wearing textured black polyurea. A rigid perforated steel grille protects the front of the enclosure, while flying hardware means it can be incorporated at the top of a WPL array, or more commonly flown as a separate array alongside. Like the ground-stack version, a combination of forward and rear-facing enclosures can be configured with specific directional properties.

The SXHF218 can be powered by either a single channel of a Martin Audio iK42 4-channel amplifier, or a bridged pair if maximum output is required. Its connector sockets are wired so that one four-core cable from the amplifier will power two subwoofers. SXHF218 settings are determined by a pre- determined parameter set in Vu-Net when used in conjunction with iK42, or Settings are available from the Martin Audio website when used with alternative amplifiers.

By adding the input board cover accessory, the subwoofer is fully weather resistant and suitable for permanent outdoor usage.

Please call us at Old Barn Audio on 01892 752246 if you have any questions or would like to buy a Martin Audio SXHF218 or any other product from the SX Series of subwoofers.

Features of the Martin Audio SXHF218 :

  • Ultra-high output ground-stacked subwoofer
  • Hybrid® horn/reflex loading for maximum acoustic efficiency and low frequency extension
  • Dual long-excursion 18” (460mm)/4.5” (115mm) voice coil neodymium drivers
  • Forward or rear-facing operation

Ideal Installations :

Technical Specifications Download the Martin Audio SXHF218 product data sheet