Martin Audio XD15
The Martin Audio XD15 is a very high-output, wide-bandwidth, two way system, equally suited to portable live sound applications, theatre sound and fixed installations. It features a high-specification 15” (380mm) low frequency drive unit and a 1.4” (35mm) exit compression driver mounted on a user-rotatable 80° x 50° constant directivity
horn.
The 15” (380mm) LF driver has a lightweight 4” (100mm) voice coil and flux demodulation rings to reduce distortion at high excursions. Its neodymium motor system combines high sensitivity with low weight and advanced cooling reduces power compression to negligible levels. The 1.4” (35mm) exit HF driver has a 3” (75mm) pure titanium dome and ultra-high flux neodymium motor system for
maximum efficiency. The internal LF/HF crossover is switchable between passive or bi-amp operation, depending on user requirements.
The XD15 is the perfect solution for very high-power applications where flexibility, ease of installation and speed of deployment are important factors. The versatile, multiangle enclosure and rotatable horn facilitate either horizontal or vertical orientation, and comprehensive brackets support the full variety of mounting options – including surface, ceiling and pole mount. Integral M8 inserts for simple eyebolt suspension increase the options even further. In its horizontal configuration, the XD15 is also ideal as a very high-output stage monitor.
When used in bi-amp mode, or with a subwoofer such as the Wavefront WS18X or WS218X it is recommended that the XD15 is used with the Martin Audio DX1.5 or
DX2 controller. When operated as a passive system, it may be used without a controller, but will benefit from the DX1.5 or DX2‘s EQ and limiter functions.
Please call us at Old Barn Audio on 01892 752246 if you have any questions, or would like to buy either a Martin Audio XD15 high power speaker system or any other product from the X Series.
Features of the Martin Audio XD15
- Versatile, multi-angle plywood enclosure
- Very high-output two-way system
- 15″ (380mm)/4″ (100mm) coil, ultra-long excursion, low-distortion neodymium LF driver
- 1.4″ (35mm) exit, titanium dome, neodymium HF compression driver
- Rotatable 80° x 50° horn for portrait or landscape orientation
- Switchable passive/bi-amp crossover
- 8 ohm nominal impedance
- Integral pole-mount and M8 rigging inserts
- Comprehensive mounting options and accessories
Ideal applications for the XD15
- Portable live sound reinforcement
- Theatre Sound
- Fixed Installations
- High power stage monitor
Related Products
Customers who viewed the Martin Audio XD15 also looked at the following products