Symetrix has just launched new products. The Radius NX 4×4 (4 analog inputs, 4 analog outputs) and Radius NX 12×8 (12 analog inputs, 8 analog outputs). Both feature 64×64 redundant Dante and identical DSP resources. The two differ only in analog I/O, logic output, and external control input capacity. The reduced cost of the 4×4 makes it extremely competitive in applications where many Dante endpoints are routed to a primary DSP and fewer analog connections are required.
The device shall provide four analog mic/line inputs that are adjustable from line to mic level with coarse gain, fine trim, phantom power, invert and mute, and four analog line outputs that are adjustable with fine gain and mute. All signal processing, mixing and routing functions (including I/O levels) shall be controllable via software. Audio inputs and outputs shall be accessed via rear panel 3.81 mm terminal block connectors.
Optional virtualized and scalable AEC coprocessor module
For conferencing applications the dual-core coprocessor provides up to 16 channels of full bandwidth AEC with unparalleled clarity and intelligibility.
USB audio port
Enables soft-codec conferencing and computer-based multitrack recording or playback.
USB host port
Supports upcoming recording and archiving, audio media playback, digital messaging, and automatic unit backup for rapid field swaps.
128×128 Super Matrix
A Next-generation SHARC Dual-core Processor enables a Composer Super Matrix – placing the burden of large matrices in one core while freeing the second core for general purpose signal processing – making it possible to design very large and complex systems around a single Radius NX. View modes make navigating through large matrices a breeze.
Configurable 4-port gigabit switch
Services both Dante and control networks, eliminating or reducing the need for external switches while avoiding 100 Mbit bottlenecks.
Ultra-low noise preamps
Digitally controlled 3 dB steps facilitate precise gain setting resulting in unmatched sound quality.
Option card slot
Accepts all Radius and Edge Expansion Cards, maximizing Radius NX input/output counts or adding special purpose functionality to reduce total system cost.
Please call us at Old Barn Audio on 01892 752246 if you have any questions or would like to buy or have installed any of the Symetrix Programmable systems, using touch screen technology into your business venue.
Features of the Symetrix Radius NX 4×4 :
- Full open architecture
- Fully programmable
- Serial output control
- Dante™ enabled
Ideal Applications for the Symetrix Radius NX 4×4 :
- Sporting Venues
- Trampoline Centres
- Bars and Restaurants
- Churches and other places of worship