Martin Audio Torus Series

The Martin Audio Torus series is a constant curvature array, designed to fill that gap perfectly, combining optimised coverage, SPL profile and cost efficiency. For applications that typically require a throw between 15-30m, a full-blown line array is not always practical, optimal or affordable. Conversely, a point source solution may not be sufficient in coverage and SPL.

However, it is much more than just another constant curvature array. According to Martin Audio, TORUS was in development for three years. In an exhaustive bid to further the acoustic concept and performance achievable.

Typically, constant curvature arrays have adjustable horizontal dispersion. But their performance can vary considerably in terms of tonality and effectiveness of coverage when different dispersions are selected. Equally, many will lack sufficient sensitivity in the mid-band frequency. Which is critically important for voice projection and clarity.

TORUS fundamentally addresses these areas and more.

Next Steps

Get in touch with Old Barn Audio on 01892 752246 if you have any questions, or would like to buy or have installed speakers from the Martin Audio Torus series.